Smok TFV8 Baby RBA Kit

With the SMOK TFV8 Baby RBA Kit you can customise your SMOK Baby Beast tank to deliver the ultimate vape! The Baby RBA (rebuildable atomizer) kit comes pre-fitted with dual fused Clapton coils. This is a 0.35 Ohm set-up that’s officially rated to vape between 30 and 60 Watts. It’s a build that rocks – but the sky’s the limit if you’d like to try winding your own coils.

PLEASE NOTE THIS RBA DOES NOT WORK WITH 2ML VERSION OF THE TFV8 BABY TANK

Inside the TFV8 Baby RBA kit box you’ll find a TFV8 Baby RBA deck, an extended Pyrex glass tube and an Allen key, along with replacement screws and seals. The kit doesn’t come with any cotton, so you’ll need to order that separately.

To access the core of the TFV8 Baby RBA deck you need to unscrew the stainless steel coil housing. The threads are smooth and slick – it’s an easy operation. The Baby RBA has a two-post deck with a diameter of about 18mm. As the pre-built deck demonstrates – there’s more than enough room for two spaced Clapton coils, or any other dual coil build that you’d like to try. Each post is drilled with two terminal holes. The coil wires are fixed in the holes using hex-head, Allen screws – far superior to the tiny flat-head screws that you often find on small RBA’s.

Wicking is fairly standard for this type of RBA. Just feed a plumped-up length of cotton through the centre of each coil, then trim the ends. You need to leave enough cotton to feed down into the RBA’s e-juice well. At this point you need to check that the steel coil housing still fits nicely without shorting out a coil. If everything is in order, you can prime the wicks with a little e juice, then screw the TFV8 Baby RBA into your tank.

Like all of the atomizer coils in the TFV8 family, the Baby RBA delivers astonishing clouds and flavours. The pre-fitted, dual Clapton build is officially rated for vaping between 30 and 60 Watts. Many vapers are finding that this coil setup can go up to higher wattages if you get the wicking just right.

PLEASE NOTE THIS RBA DOES NOT WORK WITH 2ML VERSION OF THE TFV8 BABY TANK

Coil wire, cotton and e liquid is not supplied with the TFV8 Baby RBA. Please order separately.

Contents:
1 x TFV8 Baby RBA Deck
1 x Extended Pyrex Glass Tank Section
2 x Fused Clapton Coils (Pre-Fitted)
1 x Allen Key
1 x Spare Hex-Head Allen Screws
1 x Spare Seals
 
TFV8 Baby RBA Deck Kit Features:
18mm dia. two post build deck
Deck features a ‘juice well’ design
Requires a dual coil build
Pre-fitted with a dual Clapton 0.35 Ohm set-up
Cotton wicks required (not supplied)
Large terminal holes for fat coil wire
Hex-headed Allen screws to secure coil wire
Allen key included
Spare O rings & screws included
Exceptional cloud production
Superb e juice flavour
More economical than buying replacement coils

Compatibility:
Only compatible with the SMOK TFV8 Baby atomizer tank BUT NOT THE 2ML TPD VERSION. Some background knowledge is required before building your own custom RBA set-ups.

Now available for same day delivery, in the London area, with our very own dedicated courier service, if ordered before 3pm. For all other parts of the UK you can also order this for guaranteed next working day delivery if ordered by 4pm.