Changing Vape Coils: A Beginner’s Guide
Changing a vape coil is an important aspect of maintaining your vape and ensuring optimal performance. Understanding how and when to change vape coils, as well as choosing the right coils and e-liquids, can make a significant difference in the quality of your vaping experience.
Vape coils are made of wire and a cotton wick, which absorb e-liquid and heat up to create vapour. Over time, the cotton wick can become burnt or clogged with residue, which can affect the flavour and quality of the vapour. Additionally, using coils beyond their recommended lifespan can cause them to break down, leading to leaks, dry hits, and other issues.
To avoid these problems, it is important to know when to change your vape coil and how to do it properly. This article will provide a comprehensive guide to changing vape coils, including tips on maintaining your vape and choosing the right coils and e-liquids for your needs.
Contents
Key Takeaways
- Regularly changing your vape coil is essential for maintaining optimal performance and quality of vapour.
- Proper maintenance and choosing the right coils and e-liquids can help extend the lifespan of your vape and improve your vaping experience.
- Knowing how and when to change your vape coil can help you avoid common issues such as burnt wicks, leaks, and dry hits.
Understanding Vape Coils
Vape coils are an essential component in vape kits and vape tanks, responsible for heating the e-liquid and turning it into vapour. The coil is made from a length of wire wrapped around an absorbent wick, which is often made of cotton. When the vape battery powers the coil, it generates heat that is used to vaporise the e-liquid absorbed by the wick.
The resistance of the coil is a critical factor in determining the vaping experience. The resistance is measured in ohms and determines how much power is required to heat the coil. Lower resistance coils require more power and produce more heat, resulting in larger clouds and a warmer vape. Higher resistance coils require less power and produce less heat, resulting in a cooler vape.
Coil resistance is affected by the type of wire used to make the coil. Kanthal wire is the most common material used for vape coils, as it has a high resistance and can withstand high temperatures. Stainless steel is also used as it has a lower resistance than Kanthal wire, resulting in a faster ramp-up time and a more responsive vape.
Mesh coils are a newer type of coil that has gained popularity in recent years. They are made from a mesh of thin metal wires that provide a larger surface area for the e-liquid to come into contact with, resulting in better flavour and larger clouds. Mesh coils also have a lower resistance than traditional coils, resulting in a warmer vape.
The wicking material used in the coil also plays a crucial role in the vaping experience. Cotton wicks are the most common as they are easy to work with and provide excellent flavour. However, some vapers prefer alternative wicking materials such as rayon or ceramic, which have different properties and can provide a different vaping experience.
In conclusion, understanding vape coils is essential for any vaper looking to customise their vaping experience. The type of coil, resistance, wire material, and wicking material all play a crucial role in determining the flavour, cloud production, and overall vaping experience.
How and When to Change Vape Coils
Vape coils are an essential component of any vaping device. They are responsible for heating the e-liquid, creating vapour, and providing a smooth vaping experience. However, like any other component, vape coils need to be changed regularly to maintain optimal performance. In this section, we will discuss how and when to change vape coils.
Identifying Burnt Coils
The first sign that it’s time to change your vape coil is a burnt taste. If you experience a, burnt taste in your vape, it’s time to say goodbye to your dead coil. A one-time hit off a burnt coil won’t have terrible consequences, but it’s best to replace it as soon as possible.
Another sign that your coil needs changing is when the vapour production decreases. If you notice that your vape is not producing as much vapour as it used to, it’s a sign that your coil is no longer working correctly.
Steps to Change Coils
To change your vape coil, you need to disassemble your device. Here are the steps to change your vape coil:
- Remove the tank from the battery.
- Unscrew the base of the tank.
- Remove the old coil.
- Insert the new coil.
- Reassemble the tank.
It’s important to make sure that your hands are clean and dry before handling the new coil. Use a paper towel to dry your hands if necessary.
In conclusion, changing vape coils is an essential part of maintaining your vaping device. By identifying burnt coils and following the steps to change them, you can ensure that your device is working correctly and providing a smooth vaping experience.
Maintaining Your Vape for Optimal Performance
To ensure that your vape device performs at its best, it is important to maintain it regularly. Proper maintenance can help extend the life of your vape device and prevent issues such as leakage, burnt taste, and decreased vapour production. Here are some tips for maintaining your vape device:
Proper Cleaning
Cleaning your vape device regularly is essential for optimal performance. It is recommended to clean your tank and atomiser components every week or every time you switch e-liquid flavours to avoid flavour mixing and maintain optimal performance.
To clean your tank, disassemble it and rinse the parts under running water. You can also use a soft cloth or cotton swab to remove any stubborn residue. After cleaning, make sure to dry the parts thoroughly before reassembling them.
Correct Priming
Priming your vape coils correctly is crucial for optimal performance and longevity. Priming involves saturating the cotton wick with e-liquid before use. This helps prevent dry hits and burnt taste.
To prime your coils, apply a few drops of e-liquid directly onto the cotton wick and wait for a few minutes to allow the liquid to soak in. You can also fill the tank with e-liquid and let it sit for a few minutes before vaping.
Appropriate Wattage
Using the appropriate wattage for your vape device can help prevent issues such as burnt taste and decreased vapour production. It is important to refer to the manufacturer’s recommendations for the appropriate wattage range for your device.
Using wattage that is too high can cause the coil to burn out quickly, while using wattage that is too low can result in decreased vapour production. It is also important to ensure that your battery power is sufficient for the wattage you are using.
By following these tips for maintaining your vape device, you can ensure optimal performance and extend its lifespan.
Choosing the Right Coils and E-Liquids
When it comes to changing vape coils, choosing the right coils and e-liquids is crucial for a satisfying vaping experience. Here are some things to consider when selecting your coils and e-liquids.
Understanding Coil Resistance
One of the most important factors to consider when choosing a coil is its resistance. Coil resistance is measured in ohms and determines the amount of power needed to vaporise the e-liquid. Lower resistance coils require more power, while higher resistance coils require less power.
It is important to choose a coil with the appropriate resistance for your vaping device and personal preferences. For example, sub-ohm coils (coils with a resistance below 1 ohm) are designed for high-powered devices and produce larger clouds of vapor. On the other hand, coils with a higher resistance (above 1 ohm) are better suited for lower-powered devices and provide a more restricted airflow.
Selecting Appropriate E-Liquids
In addition to coil selection, choosing the right e-liquids is crucial for an enjoyable vaping experience. E-liquids consist of vegetable glycerin (VG), propylene glycol (PG), and flavourings. VG, a thicker liquid, creates more vapour, while PG, thinner in consistency, delivers a stronger throat hit. Selecting an e-liquid with the right VG/PG ratio is essential for compatibility with your device and personal preference. For instance, 100% VG is ideal for sub-ohm coils, whereas higher PG e-liquids suit higher resistance coils better.
Flavour choice is also important. Different e-liquids vary in flavour intensity, so it’s key to pick one that matches your taste and is suitable for your device. Be cautious of certain e-liquids, particularly very sweet ones, often referred to as ‘coil killers’. These can dramatically shorten coil lifespan due to lower quality ingredients that lead to quicker build-up and damage. By understanding coil resistance and carefully selecting high-quality e-liquids, you can enhance your vaping experience while ensuring longer-lasting coils.
Frequently Asked Questions:
Leave a Reply